DANNMAR D‐12A FOUR‐POST ALIGNMENT LIFT
2019 TAX Mandates We Collect Tax in these States: CA, GA, IL, IN, LA, MD, MI, MN, NV, NJ, NC, SC, UT, WA, WV, & WI. We Will Be Contacting You to Collect Taxes if You are in Any of These States
If you can find a lower Dannmar price, let us know, We will not be undersold!
FOUR‐POST ALIGNMENT LIFT
The rugged‐built D‐12A four‐post alignment lift by Dannmar™ provides a
generous 12,000‐lb. lifting capacity and features extended runways to
accommodate a wide variety of vehicle wheelbases. Adjustable leveling, recessed
front radius plates and integrated rear slip plates makes if fully capable and
alignment ready. Compatible with all leading alignment instrumentation,
including 3D and camera wheel alignment systems.
Multi‐caster slip plates in the rear provides precise free‐floating movement to
prevent preload of the suspension during alignment procedures.
Durable front radius plates come standard and provide a fast and accurate
Multiple radius plate locations allow you to position the radius plates where
best suited to providing better clearance from lift columns or lift front cross
1/2" galvanized aircraft cables for greater lifting capacity.
Equipped with a single hydraulic cylinder hidden away under the runway for
maximum performance and reliability and minimum exposure to elements. Also
eliminates any opportunity for vehicle door or mirror damage.
Integrated hydraulic flow restrictor provides controlled descent in the unlikely
event of an unexpected hose rupture.
A durable powder coat finish can withstand harsh environments and chemical
spills and will provide years of protection.
Spring‐loaded safety locks automatically engage continuously during rise.
Adjustable safety ladders allow for precise runway leveling even when installed on
sloped floors. Features multiple adjustable height locking positions for variableheight
parking and infinite leveling.
Push‐button pneumatic lock release makes lowering operations simple and fast.
Equipped with a redundant secondary lock system acts as a slack‐cable device in
the unlikely event of an unexpected cable failure.
Lifting cables, airlines, safety latches and sheaves are all fully enclosed within lift
A maintenance‐free electric hydraulic power system assures ultimate
All operator controls are conveniently located within easy reach.
Large base plates provide a solid foundation.
Non‐slip runway surface provides maximum grip even when wet or oily.
Optional 6000 pound capacity rolling jacks (model DRJ‐6) make a great addition to
increase service capacity. DRJ‐6 comes equipped with a commercial grade airhydraulic
pump requiring 90‐150 PSI, 10‐25 CFM.
Lifting Capacity* 12,000 lbs. / 5443 Kg.
*Max Capacity / Front Axle 6,000 lbs. / 2722 Kg.
*Max Capacity / Rear Axle 6,000 lbs. / 2722 Kg.
A ‐ Overall Width 131" / 3327 mm.
B ‐ Outside Length 203‐1/2" / 5169 mm.
C ‐ Overall Length 235” / 5969mm.
D ‐ Height of Columns 88” / 2235 mm.
E – Min. Runway Height 8‐3/4" / 222 mm.
F – Max. Rise 70” / 1778 mm.
G ‐ Max. Lifting Height 78‐3/4” / 2000 mm.
H ‐ Width Between Columns 116" / 2946 mm.
I ‐ Runway Width 20" / 508 mm.
J ‐ Width Between Runways (*) 32" ‐ 49" / 813 mm. – 1245 mm.
K ‐ Length of Runways 198" / 5029 mm.
L ‐ Min. 4‐Wheel Alignment (**) 72" / 1828 mm.
M ‐ Max. 4‐Wheel Alignment (**) 165" / 4191 mm.
N ‐ Max 2‐Wheel Alignment (**) 175” / 4445 mm.
Min. Wheelbase @ Rated Capacity 140" / 3556 mm.
Min. Wheelbase @ 75% Capacity 120" / 3048 mm.
Min. Wheelbase @ 50% Capacity 100" / 2540 mm.
Min. Wheelbase @ 25% Capacity 80" / 2032 mm.
Locking Positions 12
Lock Spacing Every 4" / 102 mm.
Lifting Time 60 Seconds
Standard Motor (***) 208‐230VAC / 60 Hz. 1Ph.
* This dimension may be limited with the addition of rolling jacks.
** May vary depending on wheel size.
*** Special Voltages Available Upon Request.
The design, material and specifications are subject to change without notice.
This product hasn't received any reviews yet. Be the first to review this product!
Customers also viewed