Product Description
Features and Benefits:
- Alignment Slip Plates and Turntables
- Automatic Shut-Off Switch
- Lock Ladder Column Design
- Diamond Plate Runway Surface
- Mounting Hardware Included
The Atlas® 414A 14,000 pound capacity four post lifts are designed and built to commercial grade standards and will provide many years of service. Our Atlas® alignment lifts offer many exclusive features not found on many other competitor's lifts. Each Atlas® 414A alignment lift includes a set of front turntables. The turntables can be set in different positions on the runway to accommodate a wide variety of wheelbases. There is also a FREE air line kit ($300 value) included when you purchase the “combo package” (2-rolling jacks). The slip plates are built into the runways and are level with the front turntables. There are included metal cover plates (that cover the cut-outs for the turntables) so that the vehicle is not sitting on the turntable if the lift is not being used for alignment.
Drive-through off-ramps are available as an option.
The Atlas® 414A (14,000 LB. capacity alignment lift) incorporates many structural and cosmetic features that are found on lifts costing thousands of dollars more money. The Atlas® 414A is tested to ensure that this alignment lift system will perform flawlessly at its rated capacities. The Atlas® 414A has been manufactured to the same exacting specifications for many years.
The Atlas® 414A uses a high strength cable system (with a under runway oversized hydraulic cylinder) powered by a 220 volt (single phase) power unit to raise and lower the lift. Many competitors use an "old style" chain lifting system with an exposed hydraulic cylinder system. Old style chain lifts are difficult to "level" properly and the exposed hydraulic cylinder is responsible for numerous "door dings"
Features
Includes
Supersedes ATPK-414A-KIT
|
| Specifications | 414A |
| Capacity | 14,000 lbs |
| Lifting Height | 76 1/4" (6' 4 1/4") |
| Height of Columns | 86" (7' 2") |
| Overall Width w/ Motor | 142" (11' 10") |
| Overall Width w/o Motor | 130 1/2" (10' 10 1/2") |
| Overall Length w/Approach Ramps | 256 1/2" (21' 4 1/2") |
| Overall Length w/o Approach Ramps | 217 3/8" (18' 1 3/8") |
| Ramp Length | 50" (4' 2") |
| Length of Slip Plates | 67 1/2" (5' 7 1/2") |
| 4-Wheel Alignment Wheelbase | 172 1/2" (14' 4 1/2") Max / 96" (8') Min |
| 2-Wheel Alignment Wheelbase | 175 1/2" (14' 7 1/2") Max / n/a Min |
| Length Between Columns | 196 3/4" (16' 4 3/4") |
| Runway Length | 198 1/4" (16' 6 1/4") |
| Runway Width | 22" (1' 10") |
| Runway Thickness | 8 3/4" |
| Width Between Runways | 44" (3' 8") * |
| Width Between Runway Rails | 40 3/8" (3' 4 3/8")* |
| Outside Runway to Outside Runway | 83 5/8" (6' 11 5/8")* |
| Clearance Under Runways | 67 1/2" (5' 7 1/2") |
| Size of Column | 8 1/2" x 5 1/2" |
| Base of Column | 12" x 9 1/2" |
| Clearance Between Columns | 116" (9' 8") |
| Maximum Wheel Base | 186" (15' 6") |
| Drive Thru | 102" (8' 6") |
| Column Thickness of Steel | 3.5mm |
| Platform Thickness of Steel | 6mm |
| Cross Beam Thickness of Steel | 6mm |
| Cable Diameter | 1/2" |
| Motor | 2 HP 220V +/- 5% (209-231volts) 1 phase 30 amp breaker is required. |
| Amp Draw | 24 Amps upon initial startup & then drop down to 16 amps |
| Oil Requirement | 3-5 Gallons AW32/AW46 |
| Weight | 3,500 LB. |
