Product Description
REPLACED BY NEW MODEL: 10AP-168
The safe and rugged XPR-10S-168 two-post lift features extended height columns for added overhead clearance and an adjustable top beam to accommodate wide or narrow installation set-ups. The adjustable width design allows you to choose the best setting for your specific space or vehicle lifting requirements. The highly sophisticated yet simple and dependable XPR-Series design requires very little service or maintenance for an overall lower cost of ownership. All BendPak's XPR two-post models feature dual "direct-drive" low-pressure cylinders, maintenance free UHMW load bearings, single-piece columns, extra-tall lifting carriages and triple-telescoping arm configurations for increased arm positioning versatility.
- 10,000-lb lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
- Bolt-on 24" column extensions provide added overhead clearance
- Expandable top beam accommodates wide or narrow configurations
- Padded overhead safety shutoff bar
- Single-piece columns
- Drop-end arms provide a lower pad height
- Dual hydraulic direct-drive cylinders
- Oversized 53" tall carriage for superior strength and durability
- Electric / hydraulic power system
- Large, 17" x 19" A36 steel base plate
- Self-lubricating dura-glide UHMW polyethylene bearing system
- Single-point safety release
- Safety locks in each column spaced every 3"
- Automatic arm restraints
- Heavy-duty 1/2" aircraft-quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- 4-piece 63 mm stackable adapter set comes standard
- Triple-telescoping arms
- Versatile drop-in contact pads with stackable adapters
- ALI Approved.
| MODEL | XPR-10S-168 |
|---|---|
| Lifting Capacity* | 10,000 Lbs. / 4,536 kg. |
| *Max Capacity / Front Axle | 5,000 Lbs. / 2,268 kg. |
| *Max Capacity / Rear Axle | 5,000 Lbs. / 2,268 kg. |
| A - Height Overall: | 169" / 4,293 mm.* |
| B - Width Overall: (NARROW) | 132" / 3,353 mm. |
| B - Width Overall: (WIDE) | 145" / 3,683 mm. |
| C - Width Outside of Columns: (NARROW) | 126-3/4" / 3,225 mm. |
| C - Width Outside of Columns: (WIDE) | 139-3/4" / 3,555 mm. |
| D - Floor To Overhead Switch: | 165" / 4,191 mm.* |
| E - Inside Columns: (NARROW) | 105.5" / 2,680 mm. |
| E - Inside Columns: (WIDE) | 118.5" / 3,010 mm. |
| F - Reach (Front Arm Min.): | 27-1/2" / 698 mm. |
| G - Reach (Front Arm Max.): | 51-1/2" / 1,308 mm. |
| H - Reach (Rear Arm Min.): | 34" / 863 mm. |
| I - Reach (Rear Arm Max.): | 54-1/2" / 1,384 mm. |
| J - Min. Pad Height: | 4.25" - 6-3/4” / 108 mm. - 171 mm. |
| K - Rise: | 69" / 1,753 mm. |
| L - Max Lift Height (Pad Only): | 73" - 75" / 1,854 - 1,905 mm. |
| M - Max Lift Height (3" Adapter): | 75.5" - 77.5" / 1,917 mm. - 1,968 mm. |
| N - Drive-Thru Clearance: (NARROW) | 93" / 2,362 mm. |
| N - Drive-Thru Clearance: (WIDE) | 106" / 2,692 mm. |
| Screw Pad Adjustment: | 2" / 51 mm. |
| Motor (**) | 220 VAC / 60 Hz. 1Ph. |
| Time of full Rise: | 45 Seconds |
| Max Load Per Arm: | 2,500 Lbs. / 1134 Kg. |
* CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493. Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201.
