Product Description
QuickJack 7000TLX-110V Extended-Length Portable Car Lift
7000TLX is a 7,000-lb. capacity, extended-length truck lift that's specially made for raising heavy-duty powerhouses. Its 66" lift point reach is ideal for long-wheelbase vehicles, trucks and SUVs. It even fits under most sports cars and sedans.
Overview
The 7,000-lb. capacity 7000TLX is the safest, highest-capacity and longest-reaching portable car lift ever made. Vehicle types with lift points that stretch toward the edges of the wheelbase can finally be serviced by a fully collapsible, open-center car lift. Until the 7000TLX , only two-post and four-post lifts could service such vehicles. Even mid-rise lifts, while popular in many auto detailing shops and repair bays, often struggle with unique lift point spreads. Compared to other QuickJack models, the 66" lift point reach on the 7000TLX allows operator access to more trucks and SUVs than ever before. Despite the longer, beefier construction, the 7000TLX car lift still reaches its max rise in approximately 30 seconds. A QuickJack truck/SUV adapter kit, sold separately, adds extra rise and convenience. Like our lower-capacity portable car lifts (the 3500SLX, 5000TL and 7000TL), built-in durable urethane wheels mean the 7000TLX frames can be rolled around, indoors or outdoors, at your convenience. This is our heaviest model, but no bolts are required, and no special wiring is ever necessary. The 76" frames are longer than our TL models (the same length as the 5000TLX), but they're still convenient to roll and stow around the garage. An SUV or truck bed can make for perfect transportation to the track or other locations. As long as the ground is level, the assembly can be taken outdoors for use on dirt, gravel, grass, asphalt or concrete. Initial setup is fast and easy, and then it's seconds to get from stow-to-go. With a collapsed profile just over 3.5", the 7000TLX needs no extra support crossbeams. It's the perfect car lift for shops with little space to spare and big vehicles to service.
Features:
- Increased lifting height
- One-handed operation
- Accessories to increase versatility
Specifications:
Lifting capacity
7,000 lbs. (2,268 kg)
Lowered height
A - Frame only: 3.5" (89 mm)
B - With 2" block: 4" (102 mm)
Lifting height
D - With 2" block: 21.5" (546 mm)
E - With 3" block: 22.5" (572 mm)
F - Max. height: 24.5" (622 mm)
G - With adapters: 24.25" (610 mm)
H - With adapters + pin: 27" (686 mm)
Compare All Specifications
Lift point spread
I - Maximum: 66" (1,676 mm)
J - Minimum: 43" (1,092 mm)
Frame dimensions (ea.)
K - Width: 12.5" (318 mm)
L - Length: 76" (1,930 mm)
A - Height (lowered): 3.5" (89 mm)
Weight: 98 lbs. (45 kg)
Other specs
Time to full rise: 30 seconds
Power unit weight: 15 lbs. (7 kg)
Shipping dimensions (ea. frame):
73.75" (L) x 16.75" (W) x 6.25" (H)
(1,872 mm x 425 mm x 155 mm)
73.75" (L) x 16.75" (W) x 6.25" (H)
(1,872 mm x 425 mm x 155 mm)
Shipping weight: 304 lbs. (138 kg)
In The Box
7000TLX Left Frame Assembly
7000TLX Right Frame Assembly
1x Hydraulic power unit with control
4x Medium rubber lift blocks (2")
4x Tall rubber lift blocks (3")
2x Short hydraulic hoses
2x Long hydraulic hoses
2x Frame-positioning handles
Fittings and thread tape for setup
Instruction manual
Requirements:
Up to 3 liters of Automatic Transmission Fluid
Air source to inflate air cylinders up to 50 PSI
Assembly tools
Note: QuickJack is shipped in three boxes
